To replace the rear brakes on a 1993 Mercury Topaz, start by safely lifting the vehicle and removing the rear wheels. Next, remove the brake caliper by unbolting it from the bracket, then slide it off the brake rotor. Replace the brake pads, ensuring to compress the caliper piston if you're installing thicker pads, then reassemble the caliper and reinstall the wheels. Finally, pump the brake pedal to ensure proper brake function before driving.
replace calipers in pairs. replace brake hoses at the same time.
take it to a dealer
Since no one should really want to disconnect their brakes, this question might be asking how to repair / replace rear brake pads or shoes.Assuming that to be the case, See "Related Questions" below for more about rear drum and disc type brakes on Taurus / Sables.
how much will it cost to replace rear bumper cover on 2003 93 saab
You have to get a special socket at the auto store.
if you have a brake shoe on rear brakes, you do not have rear disk brakes pads go on disks.shoes go on drum brakes
means you have a problem in the rear brakes of your car. go to a mechanic before ya have a wreck
In the common workshop manual by Haynes.
You need to adjust the cable on the brake.
To replace the rear brakes on a 1993 Toyota pickup, start by lifting the vehicle and securely supporting it with jack stands. Remove the rear wheels and then the brake drum by pulling it off; if it's stuck, gently tap it with a hammer. Replace the brake shoes by removing the retaining springs and hardware, then install the new shoes in the same configuration, ensuring everything is secured. Finally, reassemble the drum and wheel, and repeat for the other side before lowering the vehicle.
Have to drop the oil pan, have to remove a lot of parts in the way.Can do it from underneath, you do not have to take the engine out.........
Sorry, we can't do diagrams. Look for manual in your library.