To install spark plug wires on a 2008 Hyundai Accent, first ensure the engine is cool and disconnect the negative battery terminal. Remove the old spark plug wires by pulling them straight off the spark plugs and the ignition coil, taking care to note their order. Attach the new spark plug wires by pushing them firmly onto the spark plugs and the coil, ensuring they are seated properly. Finally, reconnect the negative battery terminal and start the engine to verify proper installation.
The spark plug gap for a 2005 Hyundai Accent, according to spark plug manufacturers, is .044" (1.11mm)
The proper spark plug gap for a 1995 Hyundai Accent is .044"
The correct gap on spark plugs for a 2007 Hyundai Accent Is .044"
firing order for Hyundai 1300cc accent 2001
Its .044
.044
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
Under the cover where the spark plug wires go into on top of the engine.
A 2004 Hyundai Santa Fe 2.4 has two spark plug wires, for cylinders #1 and #3. Cylinders #2 and #4 use what's known as "spark plug connectors" or "coil to plug boots".
Alphabetical
You will need a 5/8 socket.
0.039 TO0.043 IN OR 1.0 TO1.1 MM ( SPARK PLUG GAP FROM BOOK SPECS)