Timing on all Briggs & Stratton small engines is set at the factory and non-adjustable. It is determined by the placement of the armature (coil) and position of flywheel on crankshaft. Unless the crankshaft is bent or the flywheel key is sheared (both are possible after an impact or sudden stoppage), timing is perfect. Rough running is likely an intake or mechanical problem.
How do I change points to electronic ignition on a 5 hp briggs & stratton small engine?
Brigg's and stratton 5.5 hp on the craftsman push mower your gap tool set the gap at .025-030 for briggs 5 hp
craftsman
10 thou
Gecker Motorsports Webstore
5/16 bolts 25 ft/lb
try .030 unless it is an Intek OHV and then 0.020"
5 hp and 6 ft llbs tourqe
If you don't want the engine to blow up, yes.
6hp 5 3/4 horse is correct
probably either a clogged fuel pump or a clogged air filter.
Both marks must FACE each other and cannot be off by even one tooth.