The timing chain on an Intruder 800 should adjust itself. If this isn't happening, I think you MAY be able to access the adjuster by taking the valve/rocker cover off and seeing if the tensioner is up to full stretch or is not working. If it won't adjust any further and take anymore play out of the chain, it's possible that your chain has stretched over time and needs replacing.
what kind of oil filter do I need for a 86 susuki intruder 750
To set the timing on a 1998 Suzuki Intruder 1500, first ensure the engine is at operating temperature. Then, locate the timing mark on the flywheel and the corresponding mark on the engine case. Use a timing light connected to the number one cylinder spark plug wire, and adjust the ignition timing by rotating the ignition coil until the marks align. Always refer to the service manual for specific timing specifications and procedures.
whats the timing diagram for the brute force 750
To set cam timing on a 1999 Suzuki VL1500 Intruder, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Remove the timing cover and align the timing marks on the camshaft gears with the marks on the engine case. Adjust the camshaft position as necessary, ensuring the chain or belt is properly tensioned. Finally, reassemble the timing cover and double-check the alignment before starting the engine.
It is under the chrome radiator cover.
No
how do i adjust the ignition timing on a 1990 suzuki gsx 750f
The Suzuki Intruder has a hydraulic clutch and therefor there is no adjustment.... There is an adjustment on the clutch lever for the distance from the grip, that is all...
You cannot adjust timing its done in the ecu
adjust timing 4.3 V8 engine
The water pump is the tensioner for the timing belt. if you need to adjust it, replace it.