Power Steering fluid? loosen fill cap turn wheels lock-to-lock 6-10 times check fluid level secure cap
how do I bleed my power steering pete thank you
It doesn't have a bleed valve for the power steering.
no
normally you keep turning the steering to full lock both sides and the pump should bleed itself.
shoot it
turn steering wheel lock to lock several times.
You don't bleed power steering fluid. Raise the front of the car, start the engine, turn the steering wheel lock-to-lock 3 times to get the air out of the system. Make sure to use axle stands and block the wheels so you can do this safely.
have you tried removing return line to bleed system ?
To bleed a power steering system with a broken bleed nipple, start by locating the power steering reservoir and filling it with the appropriate fluid. Next, turn the steering wheel from lock to lock several times to help expel air from the system. If air bubbles are still present, you can loosen the high-pressure line at the pump slightly while someone else turns the wheel, allowing trapped air to escape. Be cautious of fluid spray, and ensure to tighten the line afterward.
It means that you have air in the steering rack. You need to bleed it properly.
turn the steering wheel lock to lock several times it bleeds itself when it is running
You dont, when you install the new pump, fill it with fluids and put the cap back on, the pump will basically bleed it self with just afew turns of the steering wheel.