answersLogoWhite

0

leave the ignition turned on for 45mins or until the red security light on the dash has stoped flashing then start beware if the engine stalls or you turn the engine off you have to wait anutha 45mins

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you bypass a vs commodore immobilizer?

firstly you need to buy a bypass tool from supercheap auto. Then all you need to do is plug it in to the immobiliser, press go and you're done.


How do you Bypass vy commodore immobiliser?

The immobilizer on a VT Commodore must be bypassed before you can tow it. To bypass the immobilizer, remove the body control module.


How do you Bypass vx commodore immobiliser?

First you need to buy a bypass tool from an auto parts store. The next thing you need to do is to plug it into the immobiliser, press go and then you are done.


How do you bypass a VT commodore immobiliser?

The Body Control Module contains the Immobiliser. Before towing a vehicle, the Immobiliser should be bypassed. This can be done by removing the Body Control Module. Worst case scenario, use a flat bed to haul instead of tow a vehicle.


How do you bypass immobiliser Toyota hiace?

toyt


Can you bypass the immobiliser on a chrysler voyager 1997 model?

NoNo


How do you bypass Daewoo matiz immobiliser?

buy a immo emulator from china


How do you change VS commodore brakes?

how do I change the pads and rotors on a VS Commodore ?


When was Holden VS Commodore created?

Holden VS Commodore was created in 1995.


How do you bypass tf magna key reader and immobiliser?

I'm sorry, but I can't assist with that.


How do you bypass the immobiliser Ford Laser 1993?

Bypassing the immobiliser on a 1993 Ford Laser typically involves using a bypass module or reprogramming the key to eliminate the immobiliser signal. However, tampering with or bypassing an immobiliser can be illegal and may void warranties or insurance. It's recommended to consult with a professional mechanic or locksmith for safe and legal options. Always prioritize legal and ethical solutions when dealing with vehicle security systems.


How Do You bypass a VT immobiliser?

The Body Control Module contains the Immobiliser. Before towing a vehicle, the Immobiliser should be bypassed. This can be done by removing the Body Control Module. Worst case scenario, use a flat bed to haul instead of tow a vehicle.

Trending Questions
What is the voltage of a cell in a lead-acid battery? What is the meaning of the lyrics spinning wheel? What is the cross match of a fram ph8170 to a tough guard number? What fuse is the passenger airbag 2006 BMW x3? Can you drive your car when it is blowing blue smoke? How do you check oil on 2006 zx10r and with to look for? How do you change the fuel filter on a 2005 V8 Lincoln navigator? How do you change the spped sensor in a 2005 kia spectra ex? How do you replace the serpentine belt in a 1989 Chevy truck? How do you check transmission fluid 2004 infinity fx35? What would make a 2003 Camry ac smell like fumes that you can smell in hair clothing and gives headaches none of the technicians can figure out almost 2 years later the smell is still there only in ac? Why would the car make a continuous squeaking noise as soon as you put it into reverse and the brake is still applied then when you let off the brake it squeaks intermittently? Where is the fuel filter on a Mitsubishi Triton dual cab 1998 4x4? What is difference between a diesel and petrol engine? What happens if you put too much oil in your diesel engine? Why doesnt your 92 dodge dynasty start the engine cranks but will not start battery was replaced no success it will start with a spray of starter fluid down the carb but will die shortly after? What kind of transmission fluid should you use in a ford C6? Where is the fuel filter on a ford courier? I have replaced the alternator starter and the solenoid on my 1991 Ford Ranger and when you disconnect the battery cable it kills the engine. What else can be wrong? What does ac oil filter pf 35 fit?