There are two methods: 1) Jiffy Lube and other quick lube shops use a Transmission Fluid exchange machine. It is done while the engine is running in order to exchange old fluid from the torque converter. The filter and gasket are not changed in this procedure. Cost - about $90 2) You can drop the pan and let the fluid drain. This method allows changing the filter but there is a small amount of used fluid left in the torque converter. Cost - around $20
where to put transmission fluid at in 93 ford areo star
sounds like typical transmission problem
yes you can all you need to do is change the tail shaft cover between the two transmissions
Will a 1997 Aerostar transmission fit in a 2000 ford ranger?
On a 1993 Ford Aerostar : The automatic transmission modulator is on the passenger side of the transmission ( it might be behind a heat shield )
how do you fix a gas guage on a 1989 ford aerostar
the answer is just over 2 gallons (8-9.5 liters) 4liters to a gallon
dick
dipstick tube
To repair the transmission in a 1989 Ford Aerostar with a 3.0L engine, start by diagnosing the issue, which may involve checking for fluid leaks, unusual noises, or warning lights. If necessary, remove the transmission by disconnecting the driveshaft, electrical connectors, and bell housing bolts. Inspect internal components for damage, replacing any faulty parts like clutches or solenoids, and reassemble the transmission. Finally, refill with the appropriate transmission fluid and test the vehicle to ensure proper operation.
It is inside the fuel tank.
For a manual transmission: 5.6 pints. For an automatic transmission: 19 pints.