1997 Ford Explorer turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
No idea! If anyone knows how to do this please tell!
assuming you mean the light bulbs, see the answer to "how do you change turn signal lamps both front and rear on a 96 mercury grand marquis" right here in WikiAnswers.
it is a 300 polaris explorer
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
On a 1997 Ford Explorer : The right side kick panel would be inthe front passenger footwell It is the interior trim panel , just in front of the front door , by the passengers feet
reach up under the bumper. twist the bulb housing and pull out. replace bulb.
On some, you can get to the back of the light assy and take the bulbs out. If not, the assy has to come off
Chainsaw?
On a 1997 Ford Explorer : The air bag readiness warning light is located in the bottom area of the tachometer . It is between and slightly above the " BRAKE " warning light and the left turn signal indicator . It looks like a person that is seated and has a oval shaped circle in front of them
On a 1997 Ford Explorer : The toe board is the angled piece between the floor and the firewall in front of the driver and the front passenger
should be able to reach up under the bumper, and twist and pull out the bulb.
In the front passenger footwell BEHIND the kick panel according to the 1997 Ford Explorer Owner Guide . On my 1995 Ford Explorer it is BY the kick panel in the front passenger footwell , just above the carpet in the corner