Two of the bulbs may be changed through the access panel from the inside of the car simply by popping out the small access panel located midway up the plastic panel proximal to the hatch door.
If you need to remove the entire lens; unscrew the four phillips head fasteners. Remove panel described above. Locate the 10mm nut fixed to the stud (attached to the lens back) and remove it. The lens will remain in place until you pull it from the body. ie) don't worry, it won't fall out.
To change the front side light bulb on a Mitsubishi Grandis, first ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlight assembly; you may need to remove a cover or twist the bulb socket counterclockwise to release it. Carefully pull out the old bulb, insert the new one without touching the glass, and then reassemble the socket and cover. Finally, test the new bulb to ensure it’s working properly.
how do you change the light bulb over the license plate on 2000 eclipse
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
h4
shogun side light bulb
Phone your local Mitsubishi dealer
there are plastic covers over them on the inside of the trunk that you pop off
peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
you don't
See sources and related links below for the 2002 Mitsubishi Lancer headlight bulb info.
You open the trunk and remove the plastic wingnut screw on the backside of the tail light and replace the bulb and put the nut back on...very easily done without tools...
Open your trunk and find the wires that go to the bulb over the license plate. Twist the base to remove the light.