0
What else can I help you with?
How do you change the windshield wiper switch in 1986 GMC suburban?
If it's the switch on the column, you just need to pull it out. If you don't have cruise control, this is an easy task. If you do have cruise, then there will be a small flat wiring harness you will need to fish out all the way down the steering column.
How do you change the wiper blades on a 1986 Pontiac Trans Am?
To change the wiper blades on a 1986 Pontiac Trans Am, start by lifting the wiper arm away from the windshield. Press the tab on the wiper blade's connector to release it from the arm, then slide the old blade off. Align the new wiper blade with the arm and slide it into place until you hear a click, indicating it's secure. Finally, gently lower the wiper arm back onto the windshield.
How do you replace wiper switch in steering column 1986 Toyota?
First you have to remove the cover on the steering column. Then locate the mounting screw for the switch. When installing the new switch make sure the alignment is correct.
How come on our 1986 bronco the wipers do not work even after changing the wiper motor?
check the fuses, wiring connectors, switch, exc.
How do you change a washer pump on a 1986 Chevy Pickup?
If it is on the bottom of the wiper motor-just unclip and it twists out
How do you change the wiper bushing on a 1986 dodge d-150 truck?
To change the wiper bushing on a 1986 Dodge D-150 truck, first, lift the wiper arms away from the windshield and remove the nuts securing the wiper arms using a socket wrench. Once the arms are off, detach the wiper motor cover to access the wiper linkage. Replace the old bushing with a new one, ensuring it fits snugly, then reassemble by reversing the steps: reattach the wiper motor cover and wiper arms, and secure them with the nuts. Finally, test the wipers to ensure they function properly.
Is the V6 engine in the 1986 Comanche worth the risk?
no
What years Cherokee fit the Comanche?
1986 to 1991
Egr valve in 1986 jeep comanche?
The 1986 Jeep Comanche EGR valve is located on the outside of the air cleaner housing. The valve can be found on the back of the housing.
I don't have any dash lights or gauges working What do I need to do for a Jeep Comanche?
I had a 1986 cj that had the same problem. Couldn't find the problem until the dimmer switch on the floorboard went out. Replaced the switch and the gauge lights started to work.
How many years did they make jeep Comanche?
from 1986 to 1992.
How do you change your high beam switch on a 1986 Mercury Topaz?
Just take the covers off the steering column, switch is there.
