answersLogoWhite

0

What else can I help you with?

Related Questions

How do you change a front dipped beam bulb on a Mercedes b class?

To change the front dipped beam bulb on a Mercedes B-Class, first, open the hood and locate the headlight assembly. Remove the cover or dust cap on the back of the headlight, then disconnect the electrical connector from the bulb. Carefully twist and pull the old bulb out, and insert the new bulb without touching the glass. Reconnect the electrical connector, replace the cover, and test the new bulb to ensure it's functioning properly.


How do you change a near side side light bulb on a vectra b 2001?

To change the near side side light bulb on a Vectra B 2001, first ensure the vehicle is turned off and the keys are removed from the ignition. Open the bonnet and locate the headlight assembly; you’ll find a plastic cover at the rear of the near side headlight. Remove this cover, then twist the bulb holder counterclockwise to release it. Finally, pull out the old bulb and replace it with a new one, ensuring it’s securely fitted before reassembling everything.


Why do you keep blowing out the driver side headlight on your 2002 Jeep Liberty?

Are you touching the bulb with your oily fingers b/c once you do that, the bulb gets hot and pops on its own.


How do you replace the headlight bulb located on a 1994 Toyota Camry?

1. Open the hood. Unplug the connector while depressing the lock release. if the connector is tight,wiggle it. 2.Turn the bulb and remove it.Install the new bulb and install the connector. To install a bulb, align the tabs of the bulb socket with the cutouts of the mounting hole. Aiming is not necessary after replacing the bulb.When aiming adjustment is necessary,contact your Toyata dealer I have a 93 camry. I don't think there was too much difference between the headlight-changing process of the 93 and the 94. There is hardly any ROOM to remove the headlight bulb housing. It is really tight in there. Is there any way to allow the entire headlight assembly to be loosened and shifted forward, allowing more room to change the headlight? Who had some ideas about this? Thank you. Mike B perstare@promail.com Yes,it is a little tight in there but it can be done without trying to move or loosen anything. If you do loosen anything,now you have a aiming problem. No need to aim if you just change the bulbs. I just changed all 4 of mine to zenon bulbs without any trouble,so take your time as it can be done .


What is the fuse box layout for a Vauxhall Zafira?

Zafira B One fuse box beside Battery, one fuse box behind panel at LH rear tail light.


How do you change stoplight bulb on a ford b Max?

To change the stoplight bulb on a Ford B-Max, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the tail light, then carefully pull the assembly out. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Finally, test the new bulb to ensure it's working properly.


How do you replace the headlight assembley on a 2000 Mitsubishi Montero Sport?

A. You will need a flat-head screw driver. B. under the hood you will see that behind the headlight there's a housing type fixture. Turn counter-clock wise to remove this housing. The bulb is seated within this housing. You will notice that you can't simply pull the bulb out. There's a tab that houses the bulb within the outer housing which prevents you from doing so. Use your screw driver to hold this tab down while pulling the bulb housing out. If you have difficulty locating this tab, note that your replacement bulb also has this same tab on it.


How many Muslims does it take to change a light bulb?

Choose one of these and call the doctor in the morning... A) Five. One to change the light bulb and four to chant "Allah is great". B) None. If the bulb has broken, it is the will of Allah and it would be blasphemy to attempt to change it. C) Four. One to change the bulb, one to check if changing light bulbs is legal in the Quran, one to blow up the person who changed it and one to protest that Islam stands for peaceful change of light bulbs.


What is the difference between a b type bulb and a ca type bulb?

The main difference between a B-type bulb and a CA-type bulb is their shape. A B-type bulb has a blunt tip and a round shape, while a CA-type bulb has a candle flame shape with a pointed tip. Additionally, CA-type bulbs are often used in decorative fixtures where the bulb is visible.


What type of headlight bulb are used in a vectra?

Hi, I'm no pro mechanic but assuming that you have a vectra B, i have had to replace the headlight bulbs on mine and i believe that you require; 1x pair of H7 bulbs (Dipped beam) 1x pair of 501 bulbs (Sidelights) 1x pair of H1 bulbs (main beam) NB: Not all vectras take the H1 bulbs, mine does not anyway so i have 4x H7 bulbs, but of course i think this depends on the type of bulb holders your vectra has. P.S check out this link: http://www.autobulbsdirect.co.uk/bulb/bulb_master_300 0.php?


How often should you change a cambelt on a vauxhall zafira B 1.9cdti?

5 years old no matter how low the mileage or before if mileage reaches 50.000 as water pump bearings are prone to seize about this mileage, It has been known for them to seize at 17.000.


What is a Type B bulb?

Its A Candelabra base bulb :-) However, one can find "medium" sized base bulbs marked "Type B."