To change the antifreeze in a Kawasaki 4010 Mule, first ensure the engine is cool and then locate the radiator drain plug underneath the radiator. Open the drain plug and allow the old coolant to completely drain into a suitable container. Next, close the drain plug, refill the radiator with a mixture of the appropriate antifreeze and distilled water, and run the engine for a few minutes to circulate the new coolant. Finally, check the coolant level and top off as needed.
You open the hood on the front of the mule and it will be on the left side
i dont know i need to find out
1.5L ( 1.6 US qt )
1.5L ( 1.6 US qt )
GL5 or 6
You open the hood on the front of the mule and it will be on the left side
The oil capacity of a 2016 Kawasaki Mule 4010 is approximately 2.5 quarts (2.4 liters) when using a filter. If you are changing the oil without replacing the filter, the capacity is about 2.0 quarts (1.9 liters). Always consult the owner's manual for the most accurate specifications and recommendations.
The Kawasaki Mule 4010 typically has an oil capacity of approximately 2.5 quarts (or about 2.4 liters) when using a standard oil filter. It's important to consult the owner's manual for the specific model year for precise specifications, as capacities can vary slightly. Always ensure to check the oil level using the dipstick after filling to avoid overfilling.
oil plug location
An oil change should be done according to mileage and not necessarily time changes. You can give the Kawasaki Mule 610 an oil change after every 10,000 kilometers.
The drain plug for the 2011 Kawasaki Mule 4010 Trans is located at the bottom of the engine oil pan. It is typically a hex or socket type plug that can be accessed from underneath the vehicle. Make sure to use the appropriate tools and take safety precautions, such as ensuring the vehicle is on a level surface and securely supported, before attempting to drain the oil. Always consult the owner's manual for specific details and recommendations.
how much for Kawasaki mule 3010 with 170 hrs