To change the coolant on a Honda 1800C, start by ensuring the engine is cool and then locate the radiator drain plug, usually at the bottom of the radiator. Place a drain pan underneath, remove the plug, and let the old coolant flow out completely. Once drained, replace the drain plug, refill the radiator with fresh coolant through the filler neck, and also top off the reservoir if needed. Finally, run the engine briefly to allow the coolant to circulate, check for leaks, and ensure the coolant level is correct.
3 3/4 QUARTS
i need to know where is the fuse locatded?
no one knows it generally only makes a sixteenth of a mile
White Power
It has been reported to be 106 bhp. It has been reported to be 106 bhp.
B = Change engine oil and filter.5 = Change engine coolant.
According to manual, this is a reminder to change coolant.
To change the coolant in a 2004 Honda 500 Rubicon, first ensure the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Remove the drain plug and allow the old coolant to fully drain into a suitable container. Once drained, close the plug and refill the radiator with a 50/50 mixture of Honda-approved coolant and distilled water. Finally, run the engine for a few minutes to circulate the new coolant, checking for leaks and topping off as necessary.
You can use any commercial coolant for automobiles or Honda's own coolant.
Yes, you should change the coolant on a 2005 Honda Rancher 400 ATV. Regular maintenance, including coolant changes, is essential to ensure optimal engine performance and prevent overheating. It's generally recommended to replace the coolant every couple of years, or as specified in the owner's manual, to maintain the cooling system's efficiency. Always use the recommended type of coolant for your ATV.
Change it every 5 years or 60,000 miles whichever come first.
I recommend you go to your local Honda dealer and purchase Honda Long Life coolant.