Changing the Cabin Filter for 2010 Equinox 6cyl
1. Open and empty glove box.
2. Find stopper tab at the top(It's used to stop the glove box when fully open)
3. Push it up and out of the way so the glove box can open to its full extent.
4. Behind the bottom of the glove box door is a hinge the glove box uses to swivel forwards and backwards. With glove box open to its full extent, you just have to lift it off of the hinge. May require a little wiggling.
5. After the glove box is removed you will be able to see a black plastic cover with a round shape (covers the fan? which sits horizontal). Above is a rectangular door with two tabs keeping it shut. Both tabs need to be pushed up so the door can swing up, giving you access to the filter.
6. Pull out the old filter (Screwdriver may be needed to work loose if very dirty)
7. Carefully install new filter making sure you do not damage it.
8. Position glove box at its fully open position and work it onto the hinge.
9. To close it you will have to push it through the stop that you had to push in step 3.
10. Now you should be able to fully close the glove box and you are done.
Need to know what year and what size engine it has.
It depends, do you have a 4 or 6 cylinder engine?
see link below
4.5 quarts with filter change.
Purchase a Purolator Cabin Filter. It comes with detailed instructions.
The oil filter is a cartridge type and is located in front of the engine inside a canister. Can be serviced from the top, assuming this is the 4 cylinder engine.
How do you change the fog light on a 2005 Chevy Equinox?
What year and which air filter. Engine filter or cabin filter. 2001, cabin and Engine
Do it yourself engine transmission flush and filter change on 2005 Chevy silverado 5.3?"
What causes the change oil light to stay on after starting for 2 to 3 minutes maybe longer on a 2006 chevy equinox 3400 engine.
there is a big filter in the passenger side firewall under the wiper.
No it is not an interference engine.