To change the exhaust manifold on a 2001 Oldsmobile, first, disconnect the battery and remove any components obstructing access to the manifold, such as the intake or engine covers. Then, detach the exhaust pipes and unbolt the manifold from the cylinder head while ensuring you have a proper gasket for reinstallation. Replace the old manifold with the new one, reattach the exhaust pipes, and reconnect any components you previously removed. Finally, reconnect the battery and check for any exhaust leaks.
MuscleCar - 2001 Olds Radiator Mount and Exhaust was released on: USA: November 2013
They are way down on the sides of the block. They should be near the exhaust manifold
Front sensors are usually in the exhaust manifold, at the point where the pipes join from each cylinder.
how to change drive belt 2001 alero
Start at the exhaust manifold and follow the exhaust from the manifold rearward. You will find the O2 sensors. It may be mounted right on the manifold or somewhere on the exhaust pipe. Looks like a spark plug base with a single wire attached. Unhook the wire and use a boxed end wrench to unscrew & remove/replace the sensor.
The oxygen sensor on a 1999 Oldsmobile Intrigue 3.3 liter is in the exhaust manifold/pipes
Do you mean the CO2 sensor? It is in the exhaust manifold where the pipes come together. The sensor looks like a spark plug with one wire coming out of it.
No.
2, one around, the catalytic converter, you can´t miss it, there is a wire going into a spark plug like thing in the exhaust, the other one is on the exhaust manifold. Its the other odd electric wire.
how to get the check oil light to go off on a 2001 olds alero
i am replacing the starter on olds 1995 aurora
yes i think so