It will vary depending on if you have HID lighting or Halogen Lighting as well as the year of the Mazda MPV which you did not include in your question. Here is a headlight bulb general replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
HOW DO I CHANGE LIGHT BULBS
There are two housings above the plate all you need is a Phillips head screw driver remove the 4 bolts and change the bulbs it's that easy
Do not touch the glass on new bulb because the oil on your fingers can make bulb burn out. Open hood, locate plastic connector that goes into head light assembly, turn to left to remove, swap bulbs, replace into headlight assembly.
Most likely with an new control head.
Go to AutoZone, when you purchase the bulbs, they'll install for free
How to replace passenger side head light bulbs in a 2000 Honda Accord?
There should be a phillips head screw holding the light on, take the screw out and pull the light off the fender and then replace the bulb.
how are u? well u have to take out the head light clips which are on the sides of the head light then pull out the head light and uncover the second rubber cover i believe then reach in the head light and turn the socket to the left and and should come out the just change the bulb...when putting the bulb back just turn it to the right and put back the head light and rubber cover and the side clips and that's it...good luck
There are several torx head screws around the rim of the lens. If it just one of the bulbs that needs changed and the screw heads are stripped, you can get to the bulbs by reaching under the tail fin and into the back of the light.
Hi turn the wheels on full lock there is a flap in the wheel arch you access the head light bulbs there.
replace headlight on mazda sp20
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.