You have to release the brake manually ore in the screen.
Then replace the pads; pistons have to be turned and pushed at the same time (cap of brakefluid reservoir has to be removed)
Keep an eye on the brakefluid level.
Double check your work and make sure everything is clean and creased with copper grease.
Do not attempt without proper tools and experience!
u break the car
depends on which break pads.
I had to brake suddenly to avoid hitting the deer and prevent a break in the fence.
If the brake lights on your 1998 Citroen Xsara were working and now they are not, but the bulbs are fine, the issue may be with the brake light switch. The brake light switch is a small electrical component located near the brake pedal that activates the brake lights when the pedal is pressed. It is common for these switches to fail over time, resulting in non-functional brake lights. I recommend checking the brake light switch and replacing it if necessary to restore proper brake light functionality.
Don't break the brake handle!
break is connected with parallel to motor winding if the brake is d.c. is supply it must be connected with rectifier unit,when motor in ideal position the brake holds the shaft which is connected with gear and when motor starts the break coil will energise and motor shat became free and motor will run like this brake work
Remove the tire and wheel from your 2005 Vectra. Remove the brake spring and break caliper from the brake pad assembly. The brake pads will come off. Reverse the process to install the new brake pads.
I had to hit the brake before the glass would break.
To turn off the break warning light on a Citroën C4 Picasso, first ensure that the parking brake is fully released. If the light remains on, check the brake fluid level, as low fluid can trigger the warning. Additionally, inspect the brake system for any faults or issues. If these steps don't resolve the problem, consult the vehicle's manual or a professional mechanic for further assistance.
you take the old break pads off and put on the new ones
How do you replace the front break pads on a Toyota corolla .
If your brake shoes are squeaking you need to take it to the nearest expert technician or mechanic which will tell you how to change your shoes and if you need to.