I reach over and around the top of the engine to access the spark plugs.
I reach over and around the top of the engine to access the spark plugs.
Read the manual.
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
The plugs are removed with a ratchet and 5/8 inch spark plug socket.
Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. Tighten the new spark plugs by turning socket to the right.
My Chrysler 300 SRT8 with a 5.7 Hemi has 16 spark plugs
Disconnect the battery, remove the spark plug cables and boot, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.
when do you change spark plugs
remove the coil packs on top the engine with a small tork bit then change plugs
I access them from underneath, other people remove the wiper cowl and intake plenum.
On a V6, yes.
13/16 inch
You have to remove the upper intake plenum.