Take off the gas cap. Take off the big plastic cover with a socket and wrench.Then put the gas cap back on. Then pull of the spark plug boot. Then take off the spark plug with a spark plug socket and wrench. It should be 13/16" socket with 3/8" drive wrench. I Think the spark plug gap is 0.025 but you would have to look at a manual.
I have a Snapper 214XIP and it has had a DENSO W20M-U spark plug in it. It works GREAT!!!
can i use a tester for GBI 22v leaf blower to see their a spark on ignition on blower
Champion CJ8Y
http://www.toro.com/home/customercare/interactivemanuals.html Snowthrowers Single Stage Snowthrower TOC Maintenance Spark Plug Conditions Page down to Replacing a Spark Plug
Most snow blowers have the spark plug on top of the motor :to change a spark plug you get a spark plug wrench (take wire cap off the plug) put wrench on spark plug then turn counter clock wise to take it out. To put a new one back in reverse the proses
.020
Spark Plug gap is .025
0.65mm
Bmr6a
when do you change spark plugs
Mine has NGK BPMR4A
According to the manual, it is 0.030 Robert