If it is a V6 you need to remove the passenger side tire, 3 pieces of wheel well cover, drive shaft, and exhaust at the "Y" after the manifold. There are 3 bolts (13MM, as I recall) the hardest is the top bolt as 2 bolts bolt from the engine towards the wheel. The 3rd bolt attaches the alternator to a bracket. In short took us 8 hrs to remove the old one and 40 mins to install the new one and a few more hours to re-install the exhaust system, drive shaft, wheel well pieces, and the tire. What a crappy design flaw by Ford as i have changed alternators in a parking lot in less than an hour without air or a torch to heat the rusted bolts to get the exhaust loose.
Are there any steps on how to change the alternator on a 1198 ford contour?
Probably easiest to pull the driveaxel and take the alternator out that way
it is located where the transmission is and is very easy to change. on a 2000 ford contour that is.
Yes, it shouldn't be a problem.
ransmissionfilter fordcontour
It is built into the Alternator
The 1998 Ford Contour SE V6 alternator is interchangeable with several other models, primarily those sharing the same engine and alternator specifications. Compatible vehicles include the 1995-2000 Ford Mondeo, 1995-2000 Mercury Mystique, and certain models of the 1995-1999 Ford Probe with the V6 engine. Always verify the part numbers and specifications to ensure proper fitment.
how do you change a thermostat for a 1997 Ford Contour
I'd suggest you go to a pull and pay yard. That vehicle is discontinued, and don't count on Ford continuing to support them.
The weight of a Ford Contour will vary depending on the year and model of the Contour. A 2000 Ford Contour has a curb weight of 3,126 pounds.
Usually a fusable link
visit www.contour.org