If the one in the rear of the cab. There is two screws. Unscrew pull the unit out and replace the bulb. If the one in the tail lights. Open the tail gate you will see two screws. Undo these two screws and the unit will comeout. Pull out the connector and replce the bulb. Simple. Hope this helps.
dodge 2001 Dakota brake lights won't burn Check the fuses. If the fuses are okay check the brake light switch.
Under the dash, look up above the brake pedal.
To fix a 95 Dodge Dakota with no brake lights, first check to ensure the fuse has not blown. If the fuse is good, check to ensure the brake light bulbs are not burn out.
what will make the brake light not work on a 1996 dodge dakota? fuses are good and bulbs are good
In my 1989 Dodge Dakota the brake light is on fuse number13 it is a 5amp it also goes to buzzer, speed control, check engine light, anti-lock warning light, and other things page 12-19 Haynes 1987- 1993 Dodge Dakota Repair Manual
Check Brake fluid level in master cylinder and make sure Emergency brake is fully released
You need to have the engine and abs checked for codes.
crash into wall
under the dash about 6inches above the brake pedal under the dash about 6 inches above the brake pedal
After repairing the failure that caused the code, the lights will reset themselves.
2996 dodge Dakota ABS lightIf you notice the speedometer is also not accurate the problem is most likely the rear ABS speed sensor. This is located on the top of the rear differential housing of the truck. It is simple to change, and caost about $45.
either a bad sensor somewhere, or a connection is disconnected