answersLogoWhite

0

Undo the two nuts on the right hand side and remove that side cover. The rod which controls the chain brake automatically detaches from the chain brake handle.
When you have the side cover removed place the saw on its side with the pull cord downwards.
Lift the bar up towards you and off the adjuster. unhook the chain from around the bar and the small sprocket, this part is very obvious when you look at it.
Wind the adjuster screw back a couple of turns to give you some free play and then fit the chain in the slot in the centre of the bar, over the nose of the bar and then back towards the saw. Make sure that the sharp cutting edge faces away from the saw on the top of the bar and back to the saw at the bottom of the bar.
Fit the chain over the sprocket again and place the bar back in position, making sure that the lug on the adjuster fits into one of the two small holes on the bar.
Replace the side cover and fit the nuts finger tight. Pull the chain brake lever into position and fit the control rod back into the side of it. Turn the adjuster screw clockwise to tighten the chain correctly and tighten the side cover nuts. Make sure the chain brake is off and pull the chain around to ensure it is correctly seated. You are ready to go.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

What is fuel mixture for stihl chain saw?

The fuel mixture for a Stihl chain saw is gas and oil.


What is the biggest bar and chain an 031av stihl can handle?

The Stihl 031AV chainsaw can typically handle a maximum bar length of 16 to 18 inches, depending on the type of wood being cut and the specific chain used. However, for optimal performance and to avoid excessive strain on the saw, it's generally recommended to stick to a 14 to 16-inch bar. Always consult the manufacturer's guidelines for specific recommendations and limitations.


What is the displacement of a stihl 064 chain saw?

The Stihl 064 is a 84.9cc chainsaw.


What cc is a stihl 029 super chain saw?

Stihl 029 super 56.5cc 3.8hp


Where do you buy a replacement igniton coil for a 031ac stihl chain saw?

At your local Stihl dealer


What is the price of a used Stihl 025 chain saw?

$100


What are the specifications for stihl 023 chain saw?

The Stihl 023 is 40.1cc - 2.45cu.in. -weight 10.1 lbs. w/o bar and chain


Can you put 18 inch bar on a stihl ms 210 chain saw?

Can I put a 18inch bar on a stihl


What is the Displacement of a stihl 076 chain saw?

I believe 111cc's or 6.77ci's.


Is it possible to increase bar oil flow on a Stihl chainsaw?

Some Stihl chain saws have an adjuster underneeth the saw to turn up the oiler .


What are the specs of a Stihl 031AV chainsaw?

2-stroke gas powered saw w/ electronic ignition. 16-24" bar typical, can take other bars. High torque, lower speed saw, circa 1970's to 1980's. Considered obselete for parts and repairs, but many are out there if you hunt for them Correction: later models had electronic but were so labeled, earlier 031av had points.


What size bar and chain came on the stihl 036 chain saw?

For a 20" Bar 325 Pitch .063 Gauge Chain 81 Links