First, the clutch cable is self adjusting, don't pull on the clutch cable housing to remove it from the dash panel, the self adjuster may be damaged.
Remove the power distribution center and the transaxle cover. Pull back on the clutch cable housing and disconnect the cable. Pull the cable from the slot in the transaxle and disconnect the cable from the release lever.
Push in the clutch cable and remove the cable from the pedal. Pull the cable from the dash using a slight twisting motion.
Installation is the reverse proceedure. You may want to get a manual for all the 8x10 glossy photos and stuff.
The self adjusting mechanism of the clutch cable can be slipping and making a click noise and not engaging the clutch when you press the pedal. You might just need a new clutch cable.
If the same year range (1995-2000 or 2001-2005) yes. They are the same car.
how to adjust a 95 dodge neon clutch? how to adjust a 95 dodge neon clutch?
How do you replace a slave cylinder on a 1995 dodge neon clutch
pull on it. The sheath takes up slack... makes the cable shorter.
No. The clutch is cable-actuated from the pedal assembly to the throw-out/release bearing fork asembly. There is no hydraulic assist in the clutch system.
the clutch has to be pushed in to start. there is a switch under the dash probably knocked it out of position. while changing cable.
The clutch is not adjustable.
The clutch reservoir is next to the brake reservoir under the hood, on the driver side. They both use dot 3 brake fluid.
There is no sensor .
This question does not make sense.The only way to determine what is installed in your car is to take it apart.Even then there is rarely any way to determine the maker or type of parts in your clutch assembly.
What oil viscosity is correct for dodge neon 1995