To change the coolant on a 1986 Honda Shadow 500, start by ensuring the engine is cool, then place a drain pan under the water pump and radiator. Remove the drain plug from the water pump and the radiator cap to allow the old coolant to flow out completely. Once drained, replace the drain plug, and mix new coolant with water according to the manufacturer's specifications. Finally, fill the radiator with the new coolant mixture, replace the cap, and run the engine to circulate the coolant, checking for leaks.
86 kg 500 g = 13.62 stone.
86/500
43/500
0.086 = 86/1000 = 43/500 in simplest terms
86 is already in the simplest form.
They should as long as they are the same model.
Could be low on coolant or a faulty thermostat.
Should fit it's the same generation motor.
Drain the radiator by removing the lower hose. Then remove the fan shroud then the oil cooler lines and upper hose/ Then the bolts that hold it in and pull it out. Dispose of the used coolant properly.
+10.465%
Probaly Eggman his 47 Shadow would be 86 if he wasn't a sleep so shadows 18
The manual says 442.5-447.5 cc. (14.99-15.16 oz.)