Remove pad caliper, then caliper holding frame. Disc will come off now. -Re-assemble in reverse order.
FRONT OR REAR ?
how change front strut on1995 Oldsmobile catlass suprime
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
Pull the tires off and take the brake calipers off and the rotors will pull off.
Most likely brake fluid. Check the master cylinder level.
should be on the passanger front of engine, three screws. just pull.
yes
On the front of the engine.
On a 1996 Oldsmobile Cutlass Ciera, the bleeder screw for the brake system is typically located on the brake calipers or wheel cylinders, depending on whether the vehicle has disc or drum brakes. For the front brakes, you can find the bleeder screw on the top of the brake caliper. For the rear brakes, it is located on the wheel cylinder. Always consult the vehicle's service manual for specific details and diagrams.
On a 1998 Oldsmobile Cutlass, the bleeder valve is typically located on the brake caliper or brake cylinder, depending on whether you're bleeding the front or rear brakes. For the front brakes, it's usually found on the top of the caliper. For the rear brakes, check the wheel cylinder, which is often located on the rear axle. Make sure to consult your vehicle's repair manual for the exact location and any specific procedures.
In the transmission in front of the modulator
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.