You need to unbolt the metal casement, that will say 'quad.." then lift up and remove spark plugs. If you have already gotten this far, then you probably don't need any more advice. We are trying to replace plugs on a 94. and Can't get it to start again.
To change the spark plugs on a 1997 Oldsmobile Achieva, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires from the spark plugs, being careful not to damage them. Use a spark plug socket and ratchet to unscrew the old plugs, then install the new plugs, ensuring they are gapped correctly. Finally, reconnect the ignition components and the battery terminal.
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
where would the spark plugs at on a Oldsmobile 1989 engine
They are attached to the end of the HT leads.
don't have my manuel how many spark plugs are there in a 1997 cutlass supreme oldsmobile. need to change them all v6 engine. what is the best brand to buy thank you
To change the spark plugs on a 1996 Oldsmobile Aurora, first, disconnect the battery to ensure safety. Remove the engine cover if necessary, then locate the spark plugs, which are typically beneath the ignition coils. Unscrew the ignition coils, carefully pull them out, and then use a spark plug socket to remove the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, reattach the ignition coils, and reconnect the battery.
6 spark plugs 1 spark plug to every cylinder.
6 spark plugs
The spark plugs are on the front and back of a V6 (back ones are tough to get to) L4 right in front. Turn the engine off and take off the spark wires unscrew the plugs
To change the spark plugs on a 1999 Oldsmobile Bravada, first, ensure the engine is cool and disconnect the negative battery cable. Remove the ignition coil or spark plug wires from the spark plugs, then use a spark plug socket and ratchet to carefully unscrew the old plugs. Before installing the new plugs, check the gap with a gauge and adjust if necessary. Finally, insert the new plugs, torque them to the manufacturer's specifications, reconnect the wires or coils, and reconnect the battery.
when do you change spark plugs
with a spark plug sockett