0
Remove the passenger side seat (4 bolts) and the trim panel that holds the carpet down at the bottom of the doorframe. then pull the carpet back. This will expose the right-side engine access panel. Unbolt the panel (8-10 bolts), remove it, and you will see a black cover with 3 10 mm bolts in it. remove the bolts and shield, then the plug wires and the spark plugs are exposed. at this point its just a matter of getting the correct plugs and a 16mm spark plug socket with about a 10" extension and a ratchet. remove and replace the plugs as you would in any engine.
What else can I help you with?
How do you change spark plugs on 96 subaru legacy?
you dont
How do you change spark plugs in 96 ranger?
with a socket, swivel, extension, and ratchet.
How do you install spark plugs on a 96 Nissan Maxima?
How do you install spark plugs on a 96 nissan maxima?
How do you change a distributor on a 96 Nissan Maxima?
A 96 maxima does not have "a distributor" it has 6 individual distributors or coil packs. One for each cylinder/spark plug. They are on the top side of the spark plugs.
How do you change the spark plugs on a 96 Chevy Blazer?
if you can get it on a hoist...its so much easier and quicker from below...trust me
How do you rotate the motor on a 96 Chevy lumina apv in order to change the spark plugs?
you dont rotate it you have to pull the altnator off to change them
Where are the spark plugs on a 96 Isuzu trooper?
The spark plugs in this car are on the side of the engine. They are seen after the engine cover is removed.
How do you change spark plugs in 96 GMC van?
To change the spark plugs in a 1996 GMC van, first, ensure the engine is cool and disconnect the battery. Remove the ignition wires by gently pulling them off the spark plugs, then use a spark plug socket and ratchet to unscrew the old plugs. Check the gap on the new plugs, install them by hand to avoid cross-threading, and tighten them with the socket. Finally, reconnect the ignition wires and the battery.
How do you change spark plugs in a 96 Toyota Paseo?
To change the spark plugs in a 1996 Toyota Paseo, first ensure the engine is cool, then disconnect the negative battery cable. Remove the ignition wires or coil packs from the spark plugs, then use a spark plug socket and ratchet to carefully unscrew and remove the old spark plugs. Before installing the new plugs, check the gap with a gap gauge and adjust if necessary. Finally, screw in the new plugs by hand, tighten them with the socket, reconnect the ignition wires, and reattach the battery cable.
How many spark plugs are in a 96 Buick Skylark?
A 6-cylinder has SIX and a 4-cylinder has FOUR spark plugs.... Am I missing something here?
How do you change blower resister on 96 Toyota Previa?
shaking the blower resister
What is the gap for spark plug on 1996 gmc sierra?
The gap for spark plugs in a 96 GMC sierra is .60
