I just figured it out. There is a "L" shaped lever on the right top of the headlight (passenger side turn signal) (reverse left and right if you are on the driver's side)
1. turn L shaped lever counter clockwise 1/4 turn and then pull it up; releasing the right side of head light.
http://i244.Photobucket.com/albums/gg16/warsaw_photos/avitar/200805151748_258.jpg
[IMG]http://i244.photobucket.com/albumsgg16warsaw_photosavitar200805151747_257-1.jpg[/IMG]
2. there is a 10mm bolt on the left top of the headlight that needs loosened or taken out.
3. swing out head light starting with the right side carefully.
[IMG]http://i244.photobucket.com/albumsgg16warsaw_photosavitar200805151746_256.jpg[/IMG]
4. signal is just below the headlight opening. 1/4 turn and it pops out. replace it with a 3157na that is orange in color.
5. reverse process to put it all back together.
how to change front left turn signal bulb on a 2004 chevy express
Short circuit , maybe ????
you CANT U HAVE TO REPLACE THE WHOLE CLUSTER...
2005 Chevrolet Uplander turn signal light bulb lamp replacement procedure: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the turn signal light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To change the front signal light on a 2006 Chevy Express van, remove the bottom plastic cover that runs along the grill. Pull the push pins that hold the light in place. Remove the bulb and replace with new.
Change the turn signal switch in the steering column, or the turn signal relay.
Remove the light assy and turn the bulbs counterclockwise.
You're going to have to change the hazard light button on the dash
Start with replacing the fuel cap, then drive it for a while to see if the light goes off.
2008 Chevrolet Uplander turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Under the dashboard on the drivers side, in the fuse block. Just pull it and replace it.
broken turn signal switch assemblyreplace it