answersLogoWhite

0

To charge a Yamaha Virago 535 battery, first, ensure the motorcycle is turned off and remove the battery from the bike if necessary. Connect the charger’s positive lead to the battery's positive terminal and the negative lead to the negative terminal. Set the charger to the appropriate voltage and amperage for the battery type and plug it in. Monitor the charging process, and once fully charged, disconnect the charger and reinstall the battery in the motorcycle.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

What is the top speed on the Yamaha virago 535?

Approximately 92 MPH on the 1990 model.


Is there another exhaust system that can be used for a 1983 Yamaha Virago 535?

jardine rumblers


Why is my Yamaha virago 535 not hitting top speed?

possible change diaphragms in both carbs.


How much gear oil does a Yamaha virago 535 hold?

Yamaha Viraho 750 holds cca 2 dcl of gear oil. I think it will be about the same.


What is the color code for a red Yamaha Virago 535 1987?

The color code the primary color red is 4794-96944222.


What is the oil level in a Yamaha virago 535?

The Yamaha Virago 535 has a circular window on the front left side of the crankcase, immediately behind the shift linkage. The bike needs to be held upright (second person) and then the use of a flashlight helps see the level in the window. Level should be approximately center of the window.


Where is the starter relay on a Yamaha 700 virago?

I'm not sure about the Virago 700, but on the 535 it's under the right side-cover, under the seat, clinging to the side of the under-seat gas tank. If in doubt, follow the thick positive wire from your battery, it goes straight into the relay.


What common problems occur in a 94 Yamaha virago 535?

the starter clutchs are junk. but other than that...a pretty good bike


How big is the gas tank on 1993 Yamaha 535 virago?

Fuel capacity is 3.6 US gal with .7 US gal reserve


How do your replace the crankcase gasket on a virago 535?

To replace the crankcase gasket on a Yamaha Virago 535, first, ensure the engine is cool and disconnect the battery. Remove the necessary components, such as the side covers, and drain the oil. Carefully unbolt the crankcase, taking care to note the order of removal, and clean the mating surfaces thoroughly. Install the new gasket, reassemble the crankcase, and replace all removed components before filling the engine with oil and reconnecting the battery.


How much does a Yamaha 535 weigh?

The Yamaha 535, specifically the Yamaha Virago 535, typically weighs around 480 pounds (218 kg) when fully fueled and ready to ride. This weight can vary slightly based on specific model years and modifications. It's important to check the owner's manual or manufacturer's specifications for the exact weight of a particular bike.


Can you fit a center stand to a virago 535?

yes they are not cheap, but just type in virago 535 centre stand and they will come up