To check the hydraulic fluid on a Kubota B3200, first ensure the tractor is on a level surface and the engine is off. Locate the hydraulic fluid reservoir, typically found near the rear of the tractor. Remove the cap and use the dipstick attached to the cap to check the fluid level, ensuring it is between the minimum and maximum marks. If necessary, add the appropriate hydraulic fluid to maintain the correct level.
No, it must be the manufacturer recommended fluid.
dot 4
Answerit is hydrolic oilit is the same type you use in the hydrolic steering pumpAF(DEXRON-II (R) Automatic Transmission Fluid)
you either got air in the hydrolic clutch or the hydrolic clyinder is out .check your fluid level.
slave cylinder has gone bad or you are out of hydrolic fluid
take the rear seats of the empty the hydrolic fluid unplug the hose anf the electric put the new on in replug every thing fil up with hydrolic fluid
What hydrolic fluid to use for bad boy zero turn mower
To check the hydraulic fluid in a Massey Ferguson 230, locate the hydraulic fluid reservoir, which is typically found near the rear of the tractor. Remove the reservoir cap and use the dipstick or sight gauge to check the fluid level. Ensure the tractor is parked on a level surface and the engine is off before checking. If the fluid is low, add the appropriate type of hydraulic fluid as specified in the owner's manual.
Beside the gear shift levers
The power steering hydrolic washers needs to be replaced and be sure to use the correct hydrolic oil !!
You may have a hydrolic clutch. One that takes fluid to make it work, check your clutch fluid.