answersLogoWhite

0

Normally by starting the engine and putting in park while idling. Remove the transmission sip stick, wipe it clean, reinsert and remove and check the level. Make sure the engine and transmission is at operating temperature, and the car is sitting on a level surface. This is not true of ALL vehicles. Try looking in the owners manual for instructions, or it may be written on the dipstick.

manual trans plug is on drivers side about halfway up, automatic has the dipstick on the pass side near firewall.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

What side is the plug on to check the transmission fluid on a 1994 ford ranger?

For your manual transmission , I believe it is on the drivers side


What type of transmission fluid does a 94 ranger use for automatic transmission?

For a 1994 Ford Ranger, the manufacturer's recommendation is DEXRON-MERCON automatic transmission fluid.


What type of transmission fluid do you use for a 1994 ford ranger?

ATF


What type fluid is used in 1993 ranger manual transmission?

I know that a 1994 ranger with a manual trans. uses automatic trans. fluid


How do you check the transmission fluid on a manual 1994 Ford Ranger?

there is a small plug in the side of the tranny you need to take the plug out if you can see the fluid it is ok should be level with the hole.


1994 manual trans fluid type ranger pu 2 wd?

I believe the manual transmission uses MERCON automatic transmission fluid


What kind of transmission oil to use on a 1994 ranger manual?

On a 1994 Ford Ranger : For transmission code " M " ( 5.6 U.S. pints of MERCON automatic transmission fluid is used in the 5 speed manual transmission , made by Mazda ) according to www . the ranger station . com ( no spaces )


What if your 1994 ford ranger will drive reverse but not forward?

If your 1994 Ford Ranger can drive in reverse but not forward, it could indicate a problem with the transmission. Common issues might include low transmission fluid, a malfunctioning shift linkage, or internal transmission damage. It’s advisable to check the fluid level first and look for any leaks. If the problem persists, consider consulting a mechanic for a thorough diagnosis and repair.


How do you check manual transmission fluid on 1994 Camaro Z28?

There is a fill plug on the side of the 1994 Camaro transmission. Remove the plug to check the fluid. The fluid should be high enough to be just before running out of the plug hole.


What type of oil for 94 ford ranger manual transmission?

For a 1994 Ford Ranger ( for North America ) The 5 speed manual transmission takes : ( 2.8 U.S. quarts of MERCON automatic transmission fluid )


What type oil is needed for 94 Ford Ranger manual transmission?

On a 1994 Ford Ranger : The 5 speed manual transmission takes ( 2.8 U.S. quarts of MERCON automatic transmission fluid ) ( transmission code " M " / Mazda )


How do you check auto transmission fluid in a 1994 jeep wrangler?

Idling in neutral.