To check the Transmission Fluid on a Clark forklift, first ensure the engine is running and the transmission is in neutral. Locate the transmission dipstick, remove it, and wipe it clean before reinserting it fully. Pull it out again to check the fluid level; it should be within the marked range on the dipstick. If the level is low, add the appropriate transmission fluid as specified in the owner's manual.
first thing to do is check the transmission fluid
A/T the same place you check it. Manual transmission, on the upper side of the transmission under the truck.A/T the same place you check it. Manual transmission, on the upper side of the transmission under the truck.
you need to check your transmission fluid while your car or truck is running to get accurate results
The dipstick is on the passenger side of the truck, near the bottom of the engine and close to the firewall.
under the truck, on the side passenger side of the transmission case is a screw-in bolt for check/fill
If you have an automatic transmission, check with the engine warm and running, The dip stick is located on the passenger side rear of the engine.
The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.
What type of transmission fluid does my 1989 toyota pick up truck take, manual 4 speed.
It depends on what make and model. My GMC truck YES My wifes Honda Accord NO
Depends on the make and model of the truck.
the transmission fluid for your truck is dex/merc
Have 2 resevors one for brake fluid most uses dot3 fluid its dark brown and thickish, tranny fluid can be pink mostly thin and has a dipstick for transmission fluid can be under your hood or if you have a big truck on your tranny or on side ofthe vehicle. You are welcome !