no the egr valve has a big effect on the engine,it is controlled by the pcm.
how do you clean a egr valve on a vauxhall zafira 1.6
To clean the EGR valve on a 2000 Honda Passport, first disconnect the negative battery terminal and remove the EGR valve by unscrewing it from the intake manifold. Clean the valve using a carburetor cleaner and a soft brush to remove carbon buildup, ensuring the passages are clear. Rinse it with clean water, dry it thoroughly, and then reattach it to the manifold. Finally, reconnect the battery and start the engine to check for proper operation.
Remove the EGR valve from the Corsa. Wash the EGR valve with carburetor cleaner. Make sure that the valve is clean of gunk and let it dry. Reinstall the valve.
To change the EGR valve on a Chevy Malibu, first, ensure the engine is cool and disconnect the battery. Remove the EGR valve by unscrewing the bolts that secure it and detaching any electrical connectors and vacuum hoses. Clean the mounting surface on the engine, install the new EGR valve, and reconnect any hoses and electrical connectors before securing it with the bolts. Finally, reconnect the battery and start the engine to check for proper operation.
Where is the EGR valve located on a 2000 Ford Explorer
DID U Clear the code B 4 U rechecked ?? Did U clean Out the Passage ways where the EGR Valve goes .
does a Hyundai tiburon have a egr valve
Whenever it fails.
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
po405---egr flow sensor low input-- this basicly means that the egr or connections to it need attention. remove and clean egr to get carbon build up out of it. also make sure it is clean at motor side where it mounts to engine, if no carbon replace egr valve.
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.