0
What else can I help you with?
How do you know when oxygen sensor is not working?
The computer will tell you. If you have a "check engine" light, connect a code scanner to see what the computer has detected. If there is a problem with the oxygen sensor the code scanner will display the appropriate problem code.
Jeep Cherokee 1998 no communication with scanner?
I had the same problem, I found i had a blown fuse in the fuse panel. After replacing the fuse, scanner had no problem reading or connecting with the computer on my jeep.
How do you reset check engine indicator for 2002 Lexus ES300?
You can disconnect the battery terminal, wait 10 seconds and then re-connect, this will reset the onboard computer and the check engine light will go out. However, this only resets the computer and does not solve the underlying problem with the vehicle. To correct the problem the code will have to read by a scanner and this will give some idea as to the problem with the vehicle.
How do you reset the check engine light on a 1996 sonoma?
First, you have to find out why it's on, repair the problem, then the computer will often reset itself. If it doesn't, you may need to connect an onboard diagnostic scanner. Just unhook the battery for a few mins... and it will go off if the problem is fixed
Is an scanner an output device?
No, it is an input. The data goes in to the computer from the scanner, not out of the computer to the scanner.
How do you reset the computer on a 1999 Pontiac Montana?
Simply pulling the battery cables will not work on this minivan, you must reset the codes with a code scanner. I disconnected the battery cables for 24 hours and still had to borrow a snap-on scanner from a friend to read and reset the codes.
How do you reset the ABS traction control codes?
AnswerBringto shop that has an ABS scanner to determine problem and/or resetWow, taking it to a shop would have never crossed my mind! The guy is a freaking Einstein! Put that guy on Jeopardy! Bringto is not a word, genius!Unplugging the battery or having a shop erase the ABS code will only come back on when you start it up again. If you have mechanical abilities, purchase an Actron Brake Scanner CP9449 (mine was $120), check the code and fix it yourself. After a repair, the computer will run a self check and reset the light and code. If the light is still on, you still have a problem. Note: the CP9449 is not capable of resetting codes.
98 infiti g 20 how reset the computer?
You can try disconnecting the battery for 5-10 minutes, if that won't do it you may have to do it with a scanner
How do you reset a ford focus 2000 lx check engine light without special tools?
A lit Check Engine light indicates there is a malfunction that has been detected and a diagnosis needs to be done with an OBDII scanner to find the problem. If there is no problem, the Check Engine light can be reset either with the OBDII scanner or by disconnecting the negative battery terminal for a couple of minutes. Word of caution: when resetting by disconnecting the battery, the computer's Keep Alive Memory will be erased and the vehicle will run rough for several miles until the computer re-learns the settings.
How do you get the codes from the computer of a 2003 Chevrolet Impala?
You need to go to a shop that has a scanner and they can retrieve the codes and diagnose the problem for you.
How do you reset the check engine light on a 1998 dodge stratus?
it should be done with an obd2 scanner , but if you don't have one you can just disconnect the battery. But don't be surprised if the light comes back on. The light is on because you have a problem in the computer control system.
Is a scanner is a input or an output?
A scanner is an input device, like a microphone. You cannot send data from your computer to the scanner, only from the scanner to the computer.
