0
What else can I help you with?
How do you reset the check engine light on a 1994 Oldsmobile Bravada?
You can disconnect the negative battery cable, wait a couple minutes then reconnect the cable. This will clear the codes and reset the check engine light but, if the reason the light came on isn't fixed the light will come back on soon.
Were is the reset button for the check engine light for a 2000 Olds Bravada?
The light is reset with a scan tool after the repair. There is not a button.
How do you clear check engine light in a Kia Sorento?
Trying to clear the check engine light in a Kia Sorento yourself is not recommended. The check engine light could indicate a serious problem and the car should be inspected by someone qualified.
How do you reset the check engine light on a 1998 Oldsmobile Bravada?
After you have fixed the issue that caused your check engine light to come on, you can use a pocket scanner to erase the code, but this causes your computer to reset and during an inspection will cause many unready codes failing the inspection. You must drive your bravada 5 miles at a non-stop 55miles an hour to clear the computer, sometimes it just takes a few days of driving to get the reset to clear all codes but normally the 5 miles at 55mph will do the trick.
Turn off check engine light on 2000 Chevy Prizm?
I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
How do you re-set the check engine light on a 2007.5 Dodge 6.7 Cummins Diesel engine?
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
1997 oldmobile bravada no warning light on instrument panel when you try to start it?
If the Bravada is not starting but the engine turns over, check for spark at the plugs. If there is no spark the ignition system will need troubleshooting to find the problem.
Were is the check engine light fuse on a 2007 dodge caliber?
There isn't a single fuse for the check engine light. See related questions for explanations of why the light comes on and how to clear it.
Check engine light stays on Nissan Pulsar n16 how to clear codes?
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
Can you just clear check engine light go to NJ inspection and pass?
No, a person cannot just clean a check engine light to pass inspection. The issue causing the check engine light must be dealt with and fixed.
How do you reset check engine light on a 2000 gm sonoma?
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
Why is the check engine light coming on in a 2002 Bravada?
The computer has detected a problem with the emissions controls or something that effects emissions. Fix ASAP. It also can detect when you have not put your gas cap on tightly. The absence of a vacuum in the gas tank will cause the check engine light to come on as well. -Voice of experience. Possibility: When my Bravada had a "check engine soon" light come on it was because the O2 sensors were bad. The next time it came on was because when I had the fuel tank replaced the mechanic forgot to plug a sensor above the tank back in.
