with scissors
its in the carb behind the fuel line. Disconnect the fuel line then unscrew the connector and there she is. MAKE DAM SURE U DISCONNECT FUEL LINE PRIOR TO RECONNECTING THESE THREADS STRIP EASY CARE FULL REINSTALLING IF STRIPPED YOU GOT REPLACE TOP OF CARB,WITH FUEL LINE STILL CONNECTED U CANT JIGGLE IT SO TO SPEAK..
yes
To replace the fuel line in a 1970 Chevy Nova, start by safely lifting the vehicle and ensuring it’s securely supported. Disconnect the old fuel line from the fuel tank and the engine, using appropriate tools to remove any fittings or clamps. Install the new fuel line by routing it along the same path as the old one, ensuring it’s secured with clamps and connections. Finally, check for leaks by priming the fuel system and inspecting all connections before lowering the vehicle back to the ground.
The fuel filter is a metal cylinder about 3 inches in diameter and about 4 1/2 inches long mounted in the fuel supply line, in front of the fuel tank. Access is from the underside of the vehicle. It is connected to the fuel line with hose clamps and it is connected to the chassis with a u-shaped metal brace or a plastic frame/carriage fixed to the chassis.
To repair a fuel line in a 1968 VW Beetle, first ensure the vehicle is cool and disconnect the battery. Locate the damaged section of the fuel line, then carefully cut out the faulty part using a tubing cutter. Replace it with a new fuel line of the same diameter, securing it with appropriate fuel line clamps. Finally, reconnect the battery and check for leaks before starting the engine.
You need a special tool called a fuel line disconnect to release the tabs.
Cut out bad section of fuel line and replace with flexible fuel line and hose clamps
There is a slight amount of pressure on the line after shutdown. To relieve the pressure remove the gas cap, and look for a Schroeder valve on the fuel rail. If there is none and you want to change the fuel filter, just be prepared for a slight spray of fuel when you disconnect the fuel line. A rag over the connection when you disconnect the line will prevent a spray of fuel.There is a slight amount of pressure on the line after shutdown. To relieve the pressure remove the gas cap, and look for a Schroeder valve on the fuel rail. If there is none and you want to change the fuel filter, just be prepared for a slight spray of fuel when you disconnect the fuel line. A rag over the connection when you disconnect the line will prevent a spray of fuel.
Main Filter:Raise the vehicle and support it securely on jackstandsUse small locking pliers to clamp the fuel lines attached to the filter shutRemovethe bolts and lower the fuel filter and holder assembly for accessPry back the locking clips and push the filter up out of the holderUse pliers to slide the fuel line clamps back and diconnect the fuel hoses from the filterAuxiliary Filter:Use small locking pliers to clamp the fuel lines attached to the filter shut.Slide the fuel line clamps back using pliers grasp the fuel lines and disconnect them from the filter using a twisting motion
Disconnect the fuel supply tube for few seconds until the fuel flows freely without bubble. which is connected to fuel injector line, so vaccum will be drained out from the consumption measuring unit.......
To remove the fuel line from the fuel pump on a Chevy Silverado, first, relieve the fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls. Next, locate the fuel line connected to the fuel pump, and use a fuel line disconnect tool to release the clips or fittings, depending on your model. Gently pull the fuel line away from the pump, ensuring you have a rag handy to catch any residual fuel. Always wear safety goggles and gloves to protect yourself from fuel spills.
Located under vehicle follow the fuel line - release clamps and replace make note of fuel flow