answersLogoWhite

0

What else can I help you with?

Related Questions

Why is coolant leaking from crankcase on Polaris 400 ATV?

the mechanical seal on the water pump is out


Is there fuses on Polaris ATV?

There are no fuses on a polaris ATV.


How do you drain coolant from an Arctic Cat ATV 650 v2?

To drain the coolant from an Arctic Cat ATV 650 V2, first ensure the engine is cool and remove the radiator cap. Locate the coolant drain plug, usually found at the bottom of the radiator or engine, and place a container underneath to catch the coolant. Remove the drain plug to allow the coolant to flow out completely. Once drained, replace the drain plug, and refill the system with fresh coolant as needed.


How do you change oil on polaris sportsman 400 ATV?

where is the plug on the 400 4x4 ATV to drain the oil? Isn't the 400 a two stroke? No oil in case.


What ATV is better kawasaki or polaris?

polaris


Where is the drain plug for a 2006 arctic cat 650 h1 ATV?

Where is the coolant drain plug on 2005 Arctic Cat 650 H1


How change coolant in a Honda rancher 420 ATV?

To change the coolant in a Honda Rancher 420 ATV, start by ensuring the engine is cool and then place a drain pan under the radiator. Remove the radiator cap and drain the old coolant by loosening the drain bolt at the bottom of the radiator. Once drained, close the drain bolt, fill the radiator with new coolant (typically a mix of antifreeze and distilled water), and replace the radiator cap. Finally, run the engine for a few minutes to circulate the new coolant, check for leaks, and top off if necessary.


What type of coolant does a polaris sportsman 500 ATV take?

As long as it is for aluminum any antifreeze will work you just cut it 50/50 with water .


Where are Polaris ATV's made?

China.


What size is your ATV?

Polaris Predator 90


What is your 1994 Polaris ATV worth?

scrap


How do you change transmission oil on polaris sportsman 400 ATV?

On my 2002 Sportsman 400 the drain plug is on the bottom of the transmission. It is in the large hole in the bottom of skid plate.