You unscrew the plug on the front cover, and ad 75w90 to the bottom of the hole.
Just fill it until the lube runs out the fill hole. It is now full.
To add front differential fluid to a Suzuki King Quad 300, locate the front differential housing, which is typically situated near the front axle. Remove the fill plug, usually found on the top or side of the differential case. Use a funnel to pour the appropriate type of differential fluid into the housing until it reaches the fill level, then securely replace the fill plug. Always refer to the owner's manual for specific fluid specifications and maintenance recommendations.
It is in the center of the differential cover.
It is a rubber plug in the front cover.
On a 2008 Dodge Magnum, the fill plug for the transmission is located on the side of the transmission case. It typically has a hex or Torx head and is positioned higher up on the side to allow for proper fluid filling. For the rear differential, the fill plug is usually located on the rear cover of the differential housing. Always consult the owner's manual for specific details and guidelines.
The front differential fill plug on a Kia Sportage is typically located on the differential housing itself, usually on the driver's side. To access it, you may need to lift the vehicle for better visibility. It's often a hex or square plug, and you can identify it by looking for a threaded opening on the differential case. Always refer to your owner's manual for specific details related to your model year.
Driver's side of differntial, mid-way up case. You'll see a pipe threaded plug.
There is a plug on the front of the case. Usually a 3/8" square socket plug. Could be dirty enough not to see. Keep looking!
Through the check plug hole in the rear of the cover.
On the front, about 3" up. On mine it was a 24mm nut.
Usually you fill it to the bottom of the hole.
there is a drain (on the bottom) and fill plug (toward the top) for the front differential. 1.6 quarts of 75W90 GL-4 or GL5 gear oil.