No , on my coolant reservoir there is a cold fill mark . When the engine is cold the coolant level is supposed to be up to the mark . When the engine is warmed up the coolant level is higher
you get coolant and fill it up
By 1liter concentrated coolant oil and mix with 3liters of water and fill the expansion bottle up to the maximum level
You don't "fill up" the water pump. The water pump is just a pump that moves coolant throughout the engine cooling system. You add coolant at the radiator or the coolant recovery tank.
It means engine coolant is low
Yes , when the engine is cold the coolant should be up to the cold fill mark
fill up the radiator and then fill up the over flow located on the pass. side of the truck half way
I believe that you fill it with coolant, as the tank's name suggests.
The amount of coolant it will take to fill your vehicle is dependent upon how low the coolant level is. You can add coolant to your coolant reservoir. The reservoir will have an indicator of when the coolant system is full.
Why does the radiator fill up the reservoir
Fill it up to the full mark.
According to the Subaru service procedures, there is no bleeding necessary for the Legacy. Filling procedure is as follows. 1) Fill engine coolant into radiator up to filler neck position. Coolant capacity (fill up to