Get a new car
Underneath the washer holding tank is the pump motor.
check the fuses and relays
Replace the pump. Your local auto parts store will probably have one in stock.
Replace it with new tubing.
First listen to see if the pump located in the windshield washer reservoir is actually working. If it is not running, check the fuse and wiring. If there is power to the pump and it will not work the pump is defective and needs replacing. If the pump is working, then check to make sure the hoses running to the windshield spay nozzles are connected and not broken. If they are check the nozzle orifice to make sure no wax has accumulated. Clean out the orifice with a small straight pin or needle.
Replace the water pump.
You have to replace it. They are designed to leak when they are going bad.
Find the leak and repair it with a compression or push-in fitting.
no
i would have to say to take it to a shop they can fix it for you spend the money its not a part to mess with
Some knob probably had it apart at some point and clipped the connectors for both washer pumps onto the wrong pump. The pumps will be at the base of the washer fluid reservoir. Disconnect the connectors at the pumps and clip them onto the opposite pump. Should fix your problem.
Look for a leaking hose, water pump, or raditor find the leak and fix it.