To fix a tail light on a 1992 Ford Bronco, start by removing the two screws securing the tail light assembly to the vehicle. Carefully pull the assembly out and disconnect the electrical connector. Inspect the bulbs for any burnt-out filaments and replace them if necessary. Reassemble the assembly by reconnecting the electrical connector, positioning it back in place, and securing it with the screws.
Should be parking/tail fuse
yes
take two screws out of outer side of lense. Drop tail gate take two more screws out of in side edge of lense. Remove tail light asembly grasp the wire at the rear of the housing and turn 1/4 turn remove bulb. Reverse steps above for instalation.
Well you take out the tail light assem and remove the blown bulb
Yes, these tail lights are interchangeable.
Yes or you can be cheap and by tail light tape as temp!
The 2001 Ford Ranger pickup truck tail light fuse can be found in the fuse box. The tail light fuse will be in the first column, fourth from the bottom.
fuse number for 2002 ford focus
lower tail gate and it should be two 8mm bolts then pull light out
3157LL
You bought a ford escort... What do you expect
It is in the fuse box underneath the dash. Do you have tail lights? If not, you may have a bad light switch.