answersLogoWhite

0

perhaps the wiper switch is broken and needs to be replaced.-- The delay part of the Switch.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Is there a separate relay or fuse for the intermittent delay for the wipers on a 97 jetta your hi and lo wipers work but not the delay?

the delay on jetta wipers is different. the delay is adjustable. if someone set the delay very long, you will think the delay is not working. here's how to shorten the delay. turn the wipers to delay (one click DOWN on the stalk). immediately turn it back off and now turn it back on. the delay is the length of time you had the wipers off between the two on's. for a 3 second delay, turn the wipers to delay, immediately turn them off, wait three seconds and turn them back on. for a 6 second delay, turn them on, immediately turn them off, wait 6 seconds and turn them back on.


Why would just the intermittent wipers not be working on a 1995 Geo Metro 4 cylinder 4 door?

It's a different system then your regular wipers. They can work when the delay is broken.


What is variably intermittent wipers?

Variably intermittent wipers are a feature in many modern vehicles that allows drivers to adjust the frequency of their windshield wiper operation. Unlike standard intermittent wipers that operate at fixed intervals, variably intermittent wipers let users select a delay between wipes, accommodating different weather conditions and personal preferences. This functionality provides better visibility during light rain or mist by allowing for more customized control of the wiper speed.


What causes windshield wipers to come on inadvertently?

Probably because your wipers are on intermittent.


On a 1979 Ford Bronco Is there a difference between intermitent wiper motors and non intermintent?

an intermittent wiper has a built in delay , wipes once then waits and wipes again, speed depending setting you put it on, non intermittent wipers dont have a delay and keeps going until you turn them off, no waiting, wipes, hits bottom and wipes again right away


How do you change the speed of the intermittant wipers on a 2001 Mercedes s500?

To change the speed of the intermittent wipers on a 2001 Mercedes S500, locate the windshield wiper stalk on the right side of the steering column. Turn the stalk to the "Intermittent" setting, and then adjust the speed by rotating the dial or knob, which is typically located at the end of the wiper stalk. This will allow you to increase or decrease the delay between wipes according to your preference.


How do you fix the intermittent windshield wipers on your 1997 Lincoln Town car they stopped being intermittent and now only go at one speed medium fast?

Either a few wires are now unconnected or you just need a new Windshield wiper motor.


Intermittent windshield wipers were introduced by whom?

Ford Motor Company


What does intermittent mean?

The windshield wiper switch allows the driver to make the wipers work either continually or intermittently.


Does the windshield wiper switch on a 1998 Chrysler town and country contain the delay mechanism or is it a separate unit?

I'm figuring that this is the same as my 1999 town and country, and I just replaced the wiper switch.. It was easy, and it cost 76.00, and it also had NO effect on the operation of the delay in the wipers. Incidentally, I was trying to fix the delay - What my vehicle does is the delay will work about 4 times, then the wipers "jump" slightly, and the delay no longer works. you have to cycle the wiper switch on and off to get them to go again. Good luck!


What would cause the wipers on a 1998 Plymouth Voyager to have a delay before turning on and off and also cause the intermittent not to work?

Check TSB 08-31-98A. My multi function switch had to be replaced. (Part # 5012382-AA)


What does the wiper relay module control in dodge 1500?

It controls the intermittent wipers