Purchase a flush kit and new coolant from your local auto parts store and follow the directions in the kit.
It is on the top, passenger side of the engine.
It is under the housing where the upper radiator hose attaches to the engine.
Under the hood. You have to remove the airbox and it's right there.
You fill it to the bottom of the radiator cap, and to the full mark of the overflow bottle.
To flush the radiator in a PT Cruiser, start by ensuring the engine is cool, then remove the radiator cap. Place a drain pan underneath the radiator's drain valve and open it to let the old coolant flow out. Once drained, close the valve and fill the radiator with a flushing solution or water, run the engine for about 10-15 minutes, then drain again. Finally, refill with fresh coolant according to the manufacturer's specifications and check for any leaks.
The 2002 PT Cruiser has a 15 gal. tank.
The radiator plug, also known as the drain plug, on a 2002 PT Cruiser is located at the bottom of the radiator. It is typically a small, plastic or metal screw that you can turn counterclockwise to open and drain coolant. Make sure to have a container ready to catch the coolant when you open the plug. Always ensure the engine is cool before attempting to drain the radiator.
In front of the radiator.
A 2002 PT Cruiser was not built with a cabin filter.
A 2002 Chrysler PT Cruiser was not built with any GPS system.
A Chrysler pt cruiser does not have a reset.
It is bolted to the engine side of the radiator.