be more specific we got no idea what kind of car your talking about diffrent car = diffrent ways so please relist question with car or bike or truck be more specific
It is not a cover, the headlight is a sealed assembly.
Yes, the headlight cover on a 1998 Nissan Maxima can be removed. To do so, you'll typically need to unfasten screws or clips that hold the cover in place. Once these are removed, you can gently pry off the cover to access the headlight assembly. Be sure to handle it carefully to avoid damaging the plastic.
Take off the bumper cover and it is right there
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.
To replace the plastic protective cover on a Jeep Commander headlight, first, open the hood and locate the headlight assembly. Remove any screws or clips securing the cover, then gently pull it off. Place the new plastic cover in position and secure it with the screws or clips you removed. Finally, check to ensure the cover is snugly fitted to protect the headlight.
What do you mean by headlight cover?What are you trying to do?JW
Are you entirely sure there _is_ a headlight cover?
Pull off the round rubber cover on the back of the bulb and then pull the secondary rubber cover. Push and turn
what you do is you open the hood and right above the headlight is a black plastic cover held on by little plastic clips. take that off and you'll see two bid bolts connected to the frame of the headlight. take them off, jiggle the headlight alittle, and it should come right out
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
First remove the wiper and headlight switch knobs. They will pull off with force, then you will under stand how they go back on. Remove cover under dash to view fuses. Take two screw out that hold the fuse panel. The dash cover around the wiper and headlight switch actually pops off when pryed on. Once this cover is off remove the nut around the headlight switch and it will pull out, but you need to get the fuse panel out of the way. The switch it self has a pull out bar that can also be taken out by depressing the button brad on the switch itself.
To remove the headlight lens cover on a 1992 Subaru Legacy for cleaning, first, ensure the car is turned off and the headlights are cool. Use a flat-head screwdriver or a trim removal tool to gently pry off the plastic clips or screws securing the lens cover. Once the clips are removed, carefully pull the lens cover away from the headlight assembly. Clean the interior surface of the lens as needed before reattaching it securely.