In most vehicles, the turn signal automatically turns off when you straighten the steering wheel. In older or malfunctioning vehicles, though, you might have to manually flip the turn signal back to the neutral position.
Part of the turn signal switch has broken off inside the column.
cause you have to turn it off
As soon as you have changed lanes, you turn off your turn signal.
there are 2 small tabs on the turn signal swith in side the steering colum. these turn the signal off when wheel is straightened after turning. if one or both are broken, signal will not turn off automatically
Remove the turn signal retaining screws. Remove the wiring harness. The turn signal will come off. Reverse the process to install the new turn signal.
turn signal switch.......... Good Luck..........
You could be hitting the flash feature on the turn signal arm when you use it.
A car that shuts off when the turn signal is used indicates a major short in the electrical system. When the turn signal is used, it cause a massive draw on the power and shuts it down.
The turn signal cam is broken on the switch side. You need to replace the turn signal switch assembly.
Defective turn signal switch.
to turn off the wireless signal, you only need to unplug the router. if that is no good for your purposes, go to www.whatismyip.com and type the IP it gives you into your address bar. this redirects you to the router setup, where you may be able to turn the wireless signal off
Turn signal cam is broke. Remove steering wheel and replace it