0
If you're meaning how to hook up an amplifier that uses RCA connectors and all you have is speaker wire, then what you need is a RCA High/Low Line Converter. Its a small box with 2 wire connectors and 2 rca connectors. They're very cheap, there are several on eBay for about $10 or about $20 in a local store. At the back of the CD player, just splice into the wiring harness and connect to your rear left and rear right speakers.
What else can I help you with?
Head unit without rca hook ups is there a way to hook it up to the amp without those?
Yes most of you big name amp's have a high power input that comes with amp it's the flat plug that goes in the side. Just wire it to the speaker leads from headunit then wire up speakers to amp.
Where do you hook up your remote wire from amp to stock stereo for a 2006 Chevy Malibu?
You can buy an adapter that hooks up to the speaker outputs and generates a true turn on lead or you can hook it up to ignition (pink) at the key switch if you want to save money.
When hooking up an amp and speakers do you wire the speakers through the stereo or the amp?
Hook your speakers up to the amp.
How do you hook up Behringer mixer to Amplifier?
You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
How do you hook up fractory stereo to amp?
With a line output converter. Converts high level speaker outputs to low level line (RCA) inputs. Raptor install accessories part #LOCA25.
How do you hook up an vr3 200 watt 2 channel amp to a car stereo?
well you hook it up
How do you hook up a stereo equalizer?
Put the E.Q. between the pre amp and the main amp.
Your amp cuts off when you hook it up to your subwoofers?
either your amp has a short..... or.... you have a bad ground
How do I hook up an amp to a stock infiniti G35?
To hook up an amp to a stock Infiniti G35, start by disconnecting the car battery to ensure safety. Then, run a power wire from the battery to the amp's positive terminal, and connect a ground wire from the amp to a solid metal point on the car's chassis. Use RCA cables to connect the amp to the factory head unit, which may require a line-out converter if the stock system lacks RCA outputs. Finally, connect the speaker wires from the amp to your speakers, and recheck all connections before reconnecting the battery and testing the system.
How do you hook up a sub-woofer and amp?
Try the related link:
Which kind of wires will I need to hook up my Amp?
You'll need RCA style cables to connect from your headunit to the amp. You'll then need Speaker Wire to run from the outputs of the Amp to the speaker terminals. You'll also need a heavy gauge power wire. A wiring kit such as the StreetWires Power Station PSK04Ri 4-gauge amplifier wiring kit.
How do i wire a toggle switch for an amp?
Hook a switch up to the remote turn on and ground. Before the wiring for the amp.
