0
To install shock absorbers and struts on a 1995 Oldsmobile Cutlass Ciera, first, safely lift the vehicle and secure it on jack stands. Remove the wheels, then detach the old struts from the mounting points, including any necessary bolts, and disconnect the sway bar link if applicable. Install the new struts by reversing the removal process, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels, lower the vehicle, and perform a test drive to ensure proper installation.
What else can I help you with?
Does 1979 oldsmobile cutlass have shocks or struts?
It has shocks.
What other vehicle struts will fit a 2001 grand am?
Alero malibu and cutlass
How do you remove and install struts on Honda Prelude?
very carefully
How do you install shocks on 1997 Ford Escort?
they are struts you must take out the old strut,take the springs out and put them in the new struts
How much does it cost to install rear struts on a Hyundai Accent?
$340
How do you install front shock absorbers on a 2001 Acura?
It does not have shocks on the front, it has struts. You better know what you are doing when replacing struts or you can get seriously injured. Take it to a pro.
How do you change rear struts on a 300M?
The Chrysler 300 rear struts are held in place with a retaining bolt on each end of the strut. Remove the retaining bolts and the strut will come off. Reverse the process to install the new rear struts.
Do you need to compress the springs on front struts from 1990 Oldsmobile cutlass before you remove the struts?
if you are talking about those rubber springs yes! if they are: the new struts should come with a bolt in the box which you use to keep the rubber spring compressed. the springs have a threaded insert where the bolt threads in. if you don't good luck getting that rubber spring to compress again.
How much should front struts cost to replace on a 1997 infiniti qx4?
The parts cost about $200, and if you find an honest mechanic about $200 to install them. There is no alighnment nessasary for replacing the struts on Qx4s
How do you replace struts on 1993 mercury villager?
Compress the shock spring with a spring compressor. Remove the top strut bolt. Remove the bottom strut bolt. Reverse the process to install the new struts.
How do you replace the hood struts on a 2002 ml320?
To replace the hood struts on a 2002 ML320, first, prop the hood open securely. Use a flathead screwdriver to pry off the retaining clips at both ends of the struts, then gently pull the struts away from their mounting points. Install the new struts by aligning them with the mounting points and pushing them into place, securing them with the clips. Repeat on the other side, ensuring both struts are properly attached before lowering the hood.
How much is it to change the struts on a 2000 Olds Intrigue?
I'd guess about $350-$400 at a service center for all four wheels. Struts are not a DIY install, unless you have a strut compressor (not likely if you are asking this question).
