0
Do you need to compress the springs on front struts from 1990 Oldsmobile cutlass before you remove the struts?
Wiki User
∙ 15y ago
if you are talking about those rubber springs yes! if they are: the new struts should come with a bolt in the box which you use to keep the rubber spring compressed. the springs have a threaded insert where the bolt threads in. if you don't good luck getting that rubber spring to compress again.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Do you have to compress the spring before you remove struts off a 1999 Oldsmobile alero?
Yes.
What is the fuse diagram for a 1995 Oldsmobile cutlass cierra?
The fuse diagram tells you what each fuse is for (what circuit the fuseprotects) , the number on the fuse tells you how many amps the fuse can handle before it will blow.
Where is MAF sensor located in 1992 Oldsmobile Cutlass Supreme 3.1L?
1992 olds cutlass supremes do not have MAF sensors. the 3100's had them, and there were a few of them in the early years that didn't have them as well. the only sensor you will have before your throttle body would be the IAT sensor in the air filter box or plumbing.....
Can you put a 1967 Buick skylark 350 motor and transmission into a 1971 Oldsmobile cutlass supreme that had a 350 rocket in it before if so what would you have to change?
In 67 Buick didn't have a 350. It would have been a 340 or a 300 possibly a 400.
Think about how far off the ground a typical small truck is Is the answer physically realistic?
No, because the springs of a typical light truck will compress their maximum amount (typically about 10 cm) before the total weight of all the passengers and other cargo is added to the truck. When this maximum compression is reached, the springs will bottom out, and the ride will be very rough.
Where is the thermostat in a 1992 Oldsmobile cutlass supreme?
Follow the upper radiator hose from the radiator down to where it hooks up to the outlet. Outlet is held in place with 2 bolts. Remove the bolts and there is the thermostat. Drain coolant out first before removing thermostat.
How do you replace the head gasket located on a 1994 Oldsmobile Cutlass 3.4L?
To replace the head gasket on a 1994 Oldsmobile Cutlass 3.4L, everything on the top of the motor needs to be removed. The battery should be unhooked first, then the valve covers, then the head itself. Replace the new gasket after cleaning the old gunk off from the first gasket. It is a good idea to take a picture before, during, and after, to make sure everything is hooked up like it should be. One note, the valve cover gasket will also have to be replaced after removal.
How do you put compress in a sentence?
You can compress the files before sending them to save space.
Where did the Colorado Springs Sky Sox play before they relocated to Colorado Springs?
The Sky Sox were the Hawaii Islanders before relocating to Colorado Springs in 1988. Since 1993, they have been the Triple A affliate of the Colorado Rockies.
How do you use the bulb syringe to clear congestion of an infant with nasopharyngitis?
Compress before insert to the nasal.
How do you compress a photo for Twitter?
You will have to use software outside of Twitter to do so before uploading to Twitter.
Was Pink married to a Colorado Springs firefighter before Carey Hart?
no
