0
What else can I help you with?
What is the car radio wiring for 1996 Plymouth breeze?
Go buy a wiring harness. It clips right in to the old wiring, and only takes about 3 seconds. Its about 15 dollars, and you only need to wire the new harness to the new CD player/radio, and the colors will match.
I want to Change the radio in 97 Cadillac Eldorado and replace it with a factory Bose radio from a 98 Will the new radio just plug into the old wiring harness Or is it a different wiring harness?
yes. The wiring structure has only minor differences between 1996-2003 eldorados.
How can you fix the wiring on a 69 Chevy Nova?
"Fixing" a wiring harness, never seems to turn out well. Even for a pro. I would suggest you get a hold of someone like Year 1, or another reproduction company. Purchasing a new one, would be a drop in the bucket, compared to the bill the fire dept., may hand you along side the highway, after extinguishing the flames from your soon to be very valuable old Chevy. Now, your harness is exactly the same for the Camaro, of the same year.
How do you take off engine wiring harness from a 91 Toyota cressida?
There are six steps on how to take off the engine wiring harness on a 91 Toyota Cressida. Some of the step-by-step instructions are disconnect and remove the battery, remove the old harness, and use a small screwdriver to remove the clips and retainers that hold the harness in place.
How do you replace the VSS on a 93 Honda Del Sol and where is it located?
The VSS is located on the top of the transmission and is connected to the engine wiring harness. To replace it all you need to do is unplug the old one from the wiring harness and unscrew it from the transmission, instalation is the reverse of removal.
What can make a fuel pump go out in a 1999 Chevy Blazer?
Old age - overuse - faulty internal parts, blown fuse, defective wiring, etc.
How do you install a CD player in a 1994 Honda Civic if one side of the wiring harness fits to the car but the other side doesn't fit to the CD player?
Your head unit should have included a harness for that specified model. If it did go to Target or Wal Mart and buy the wiring harness adapter for your vehicle. It will be specified on the back of the box what make and model it is acceptable for, and all you will have to do is match up the wires. I just recently reinstalled a new head unit in my 92 Honda Accord and I was lucky enough to reuse the old harness as it was the same make. Hope this helped.
Do you need to replace the wiring harness on your new fuel pump?
Sometimes you do. If the new fuel pump came with a substitute harness you will need to. The reason is that a change has occurred possibly due to a recall and the old harness won't fit the replacement pump.
How do I put in a new wiring harness for the voltage regulator on a 1990 mercury topaz?
To install a new wiring harness for the voltage regulator on a 1990 Mercury Topaz, first, disconnect the battery to ensure safety. Remove the old harness by detaching the connectors from the voltage regulator and any securing clips. Connect the new wiring harness to the voltage regulator, ensuring all connections are secure and properly aligned. Finally, reconnect the battery and test the system to ensure the voltage regulator is functioning correctly.
How do you replace the power door lock actuator on the driver's door of a 2004 Chevy Aveo?
To replace the power door lock actuator on a 2004 Chevy Aveo, first, remove the door panel by unscrewing any fasteners and carefully prying it off to access the interior components. Disconnect the wiring harness from the old actuator and remove any screws or clips holding it in place. Install the new actuator by reversing the removal process, securing it with screws, and reconnecting the wiring harness. Finally, reattach the door panel, ensuring all clips and screws are securely fastened.
What color wire goes where when wiring an after market deck in your 1997 Chevy S-10?
best bet would be to not cut any wires at all. you can buy a wiring harness from wal mart and it costs maybe 15 bucks. the plug fits with the factory plug in the truck and all the wires that connect from this harness to your deck match as long as your deck isn't too old leave the factory plug in your truck it is alot easier and you wont have to worry about it shorting out...
You got a 85 Chevy truck just changed the motor in it upon removeal of the old 1 you notice the distributor had a xtra plug and wires coming from the back of itis if for spark knock control?
it might be the wiring harness for the electronic control module for the distributer if it is and hei distibuter
