If the trunk lock on a 1998 BMW E36 is jammed, you can try using a lubricant like WD-40 to spray into the lock mechanism to loosen any stuck components. If that doesn't work, you can access the trunk from the back seat by folding down the rear seats and reaching through to manually pull the trunk release lever or latch. If these methods fail, consider using a slim jim or a coat hanger to unlock the trunk, but be cautious to avoid damaging the vehicle. If all else fails, consulting a professional locksmith or mechanic may be necessary.
May have to remove rear seats and get in from there
TO GET INTO THE TRUNK OF A 89 MAXIMA YOU MUST TAKE THE BACK SEAT OUT AND CLIMB IN AN MANUALLY RELEASE THE LOCK.
drill the lock and push in, lift open the trunk door
A capnut was found inside the lock housing and had the lock jammed, The trunk lid was opened by applying downward pressure on the trunk Lid and jiggling the lock.It was taken to a Toyota Dealor for service.
Feb 4 2008 - Looks like I am not the only one with a jammed rear door lock on my 1996 Jeep Grand Cherokee. So who knows? Drafty in Ontario Canada
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
How do you open your 2006 honda accord trunk when the emergency lock will not work and the remote doesn't open it?
To open the trunk lid on a 1998 Audi, you can use the trunk release button located inside the vehicle, typically found on the driver's side near the door or on the dashboard. Alternatively, you can use the key fob to unlock and open the trunk by pressing the trunk release button. If the car is locked, inserting the key into the trunk lock will also allow you to open it. In case of a malfunction, you may need to access the trunk through the back seat if it has a pass-through option.
there is open trunk switch in the glove compartment
Try the key in the trunk lock ...
To open the trunk on a 1998 CBR 900 RR with a broken key in the lock, you can try using a pair of needle-nose pliers to gently extract the broken key piece if enough of it is exposed. If that doesn’t work, you may need to remove the trunk lock mechanism from the bike and take it to a locksmith, who can help remove the broken key or create a new key. Alternatively, consider using a lock-picking set if you have experience, but be cautious to avoid damaging the lock. If all else fails, replacing the lock may be necessary.
Won't the valet key open the trunk